Engine is Ready

This entry is part 6 of 9 in the series Backhoe

Backhoe modified engine bayThe new engine is ready for installation, and the backhoe engine bay is ready to receive it.  Both of the new front motor mounts are welded in, the old motor mounts have been removed, and new hose managers installed.

Backhoe exhaust startedWhile waiting on the weather to cooperate so I can install the engine, I got started on the new exhaust system.  On a car, this would be called the turbo “down”pipe .  Here, it exits straight up and a 5” cherry-bomb muffler will slip over the end.  Everything is tacked for the moment until I can verify the position once the engine is installed in the backhoe.

Springtime Distractions Redux

This entry is part 2 of 2 in the series Raised Beds

treeBreaksAnd these are the cold frames two days later.  Lisa did not even get a chance to put plants in her new raised beds before we had a little bit of a windstorm and one of the NEIGHBOR’S trees fell on the cold frames.

treeBreaks2Not a single sash on the rear box escaped damage.  Panes were knocked out of all four sashes; both sides of the cold frame got hit.  One picket in the bee screen was broken as well so it looks like I’ll be spending a little more time on the garden.

Bigger bite for a little saw

I do a little tree climbing, and the saw I take in the tree with me is a Stihl MS192T.  It’s a great little saw, not as powerful at the MS200T, but enough to do what I need.  However one shortcoming it has is the integral plastic bucking spike.  The plastic teeth are too short, ill shaped, and just plain too dull to dig into the bark.

ms192tPartsWhile browsing the parts manual for this saw, I noticed one of the images showed a separate bucking spike and chain catcher.  The spike part number is 1129 664 0500, and you’ll also need two of the special screws, PN 9074 477 4130.

Continue reading

Springtime Distractions

This entry is part 1 of 2 in the series Raised Beds

With the April Showers tapering off, the end of Mud Season is here!  The last couple of weekends have had a few other projects distracting me from my backhoe engine work.  First up is a nice little birdbath made from an aromatic cedar log a friend gave Lisa.

BirdbathI chainsawed a slot up the side of the post, and cut a recess in the top so that when winter arrives, we can place one of the ugly, but integrally heated, plastic birdbaths on the post.  For now, we’ll get to enjoy this whimsical glass butterfly bowl.  I hope our birds and bees like it too.

Continue reading